Smith & Burgess' Blog

2019 REMBE Process Safety Days

Posted by Brandon Ring on Sep 16, 2019 10:56:04 AM

We are excited to announce Mr. John Burgess will be presenting "The Unintended Consequences of Relief Device Pipe Modification" at tomorrow's REMBE's Safety Conference.

REMBE® Process Safety Days is a two-day networking event with highly topical presentations, live demonstration and an extraordinary evening event. It is dedicated to engineers, planners, operators, technicians, maintainer, safety inspectors, technical experts and inspection personnel in supervising organisations.

Read More

Topics: PSM Review, PSM Audit, Regulatory Compliance, Gap Assessment, Relief System Design, Relief Systems Revalidation

The Journey to Peak Facility Safety

Posted by Brandon Ring on Feb 24, 2019 11:34:05 PM

Establishing and maintaining an effective safety culture is a symphony of challenges and moving pieces.

Too often, those responsible engineers are stretched thin with competing priorities. Smith & Burgess is here to help. Our culmination of Process Safety knowledge enables us to quickly provide our clients with practical solutions that lead to compliancesignificant cost-savings, and of course, peak facility safety.

Read More

Topics: PSM Review, Industry Compliance, Compliance, OSHA, SIL Design, SIS Design, PSM Audit, Regulatory Compliance, Gap Assessment, Relief System Design, Relief Systems Revalidation, Relief Valve Mitigation, Relief Header, Flare Header Analysis, Allowable Backpressure, Spring Loaded Valves, CAPEX, Disposal System Design, Dynamic System Modelling

Case Study: Gas Plant PSM Audit

Posted by Dustin Smith, P.E. on Jun 20, 2017 6:06:00 PM

The Opportunity:

Regulators will often require that a facility review their process safety management systems on a routine basis. These audits can be performed with internal or external resources. A PSM covered gas plant in the U.S. wanted to hire a consultant to perform an audit. Furthermore, the site wanted the results presented in such a way that they could understand and improve upon the shortfalls of their PSM systems. Based on conversations with other gas plants in the region, the site selected Smith & Burgess to perform the audit.

Read More

Topics: Process Safety Management, Case Study, RAGAGEP, PSM, PSM Review, Industry Compliance, Compliance, PSM Audit, Gas Plant, Regulatory Compliance, Gap Assessment, Engineering Standards

 Safety Knowledge Should be Share...

“It should not be necessary for each generation to rediscover the principles of process safety which the generation before discovered. We must learn from the experience of others rather than learn the hard way. We must pass on to the next generation a record of what we have learned.” - Jesse C. Ducommun, Safety Pioneer
 
As Process Safety engineers and consultants, we believe our unique position creates a responsibility for Smith & Burgess to share our years of accumulated safety knowledge.


>>> Keep up-to-date with our latest Process Safety knowledge, research, and content by subscribing below. >>>

Subscribe Here!

Recent Posts

Post By Topic

See all