Blog

Employee Spotlight: Amanda Mueller

Posted by Brandon Ring on Aug 1, 2018 5:57:00 PM



Ms. Amanda Mueller 
|  Process Safety Consultant

Ms. Mueller is a graduate from the University of Missouri with a degree in Chemical Engineering. She has extensive experience with Relief Systems and Flare Design projects. Over the past three years, Amanda has been an invaluable addition to Smith & Burgess' engineering staff and consistently exhibits the firm's dedication to quality process safety management.

Read More

Topics: Smith & Burgess News, Employee Spotlight, Flare Header Analysis, Relief System Design, Mitigation, Relief Valve Mitigation

Case Study: LOPA Action Item Review

Posted by Dustin Smith, P.E. on Feb 1, 2018 5:58:00 PM

The Opportunity:

A recent Layers of Protection Analysis (LOPA) of a cavern storage facility identified several equipment installations requiring safety system upgrades. While the facility management wanted to follow proper review procedures, these proposed mitigation options seemed excessive. As a result, the site hired Smith & Burgess to review the safety systems upgrades to ensure the installations were needed and met regulatory requirements.

Read More

Topics: Case Study, Refinery, Mitigation, Action Item Resolution, PSM Review, PSM Audit, PSM, LOPA, Layers of Protection Analysis, OSHA

Case Study: Third Party Relief Valve Mitigation Review

Posted by Dustin Smith, P.E. on Nov 1, 2017 6:03:00 PM

The Opportunity:

A major US refinery used a competing engineering contractor to perform a flare and relief systems analysis. Upon completion of the project, the refinery was left with a list of facility upgrades that management deemed excessive. Smith & Burgess was hired to review the relief and flare systems documentation and provide engineering solutions that met corporate and industry requirements.

Read More

Topics: Case Study, Pressure Relief Valves, PRV Study, Third Party Review, Engineering Review, Relief Systems, PRV, Relief System Design, Refinery, Overly Conservative Assumptions, Relief Valve Mitigation, Flare Mitigation, Mitigation, Action Item Resolution, Relief Systems Revalidation

Case Study: Action Item Resolution I

Posted by Dustin Smith, P.E. on Feb 1, 2017 6:00:00 PM

The Opportunity:

Over the course of a four year time period, a major United States refinery was inundated with over 1,000 action items and asked Smith & Burgess to provide recommended resolutions.

Read More

Topics: Case Study, Refinery, Mitigation, Action Item Resolution, PSM Review, PSM Audit, PSM

Case Study: Action Item Resolution II

Posted by Dustin Smith, P.E. on Jan 1, 2017 5:59:00 PM

The Opportunity:

The Process Superintendent at a large specialty chemical manufacturing complex had over 600 open action items that were past due and needed direction on how to close them. The action items were assigned to the unit engineers who were unable to dedicate the necessary time.

Read More

Topics: Case Study, Refinery, Mitigation, Action Item Resolution, PSM Review, PSM Audit, PSM

 Safety Knowledge Should be Share...

“It should not be necessary for each generation to rediscover the principles of process safety which the generation before discovered. We must learn from the experience of others rather than learn the hard way. We must pass on to the next generation a record of what we have learned.” - Jesse C. Ducommun, Safety Pioneer
 
As Process Safety engineers and consultants, we believe our unique position creates a responsibility for Smith & Burgess to share our years of accumulated safety knowledge.


>>> Keep up-to-date with our latest Process Safety knowledge, research, and content by subscribing below. >>>

Subscribe Here!

Recent Posts

Post By Topic

See all