Smith & Burgess' Blog

Case Study: Gas Plant PSM Audit

Posted by Dustin Smith, P.E. on Jun 20, 2017 5:06:00 PM

The Opportunity:

Regulators will often require that a facility review their process safety management systems on a routine basis. These audits can be performed with internal or external resources. A PSM covered gas plant in the U.S. wanted to hire a consultant to perform an audit. Furthermore, the site wanted the results presented in such a way that they could understand and improve upon the shortfalls of their PSM systems. Based on conversations with other gas plants in the region, the site selected Smith & Burgess to perform the audit.

Read More

Topics: Process Safety Management, Case Study, RAGAGEP, PSM, PSM Review, Industry Compliance, Compliance, PSM Audit, Gas Plant, Regulatory Compliance, Gap Assessment, Engineering Standards

Case Study: Flare Gas Recovery Equipment Review

Posted by Dustin Smith, P.E. on May 23, 2017 5:08:00 PM

The Opportunity:

In order to meet the minimum corporate and regulatory requirements, a major United States refinery was implementing a Flare Gas Recovery Unit (FGRU) and needed assistance to ensure that the proposed equipment was suitable for their location. The EPC company selected for the project was skilled at refinery greenfield and upgrade projects, but had limited experience with complex flare systems. Smith & Burgess was hired to provide owners with an engineering review of the detailed engineering package prior to final acceptance and construction.

Read More

Topics: Flare Analysis, Flare Study, Flare Gas Recovery, Case Study, Flare System, Refinery, Engineering Review, Flare Management, Engineering Standards, FGRU

Case Study: Flare Maintenance Operations

Posted by Dustin Smith, P.E. on Apr 17, 2017 5:08:00 PM

The Opportunity:

After a routine preventative maintenance inspection, a refinery found that a major flare header was in need of replacement. This header connected two large sections of the refinery, and the management feared that a majority of the facility would need to be shut down to safely replace the header. The site hired Smith & Burgess to perform a Flare Header QRA to determine the minimum amount of necessary shutdowns in order to safely perform the line replacement. The Flare Quantitative Risk Assessment used load probabilities to determine the likelihood of various events, should a power failure occur.

Read More

Topics: Flare Mitigation, Flare Analysis, Flare Study, Case Study, Flare System, Refinery, Engineering Review, Flare Header, Flare Management, Flare Optimization, Engineering Standards, Quantitative Risk Assessment, QRA, Rate Increase

 Safety Knowledge Should be Share...

“It should not be necessary for each generation to rediscover the principles of process safety which the generation before discovered. We must learn from the experience of others rather than learn the hard way. We must pass on to the next generation a record of what we have learned.” - Jesse C. Ducommun, Safety Pioneer
As Process Safety engineers and consultants, we believe our unique position creates a responsibility for Smith & Burgess to share our years of accumulated safety knowledge.

>>> Keep up-to-date with our latest Process Safety knowledge, research, and content by subscribing below. >>>

Subscribe Here!

Recent Posts

Post By Topic

See all