<img src="https://secure.7-companycompany.com/796766.png" style="display:none;">

Smith & Burgess' Blog

New Decade’s Resolutions?

Posted by Brandon Ring on Jan 13, 2020 4:21:56 PM

"Great teamwork is the only way we create the breakthroughs that define our careers."

As we enter 2020, most of us have already taken a moment to reflect on last year's successes and failures. (At least on a personal level.) A somewhat painful and unavoidable exercise to help guide your decisions in the upcoming year.

However, how many have taken stock of our past decade's personal successes and failures?

If you haven't, quickly give it a shot right now.

Read More

Topics: PSM Review, Industry Compliance, Compliance, OSHA, SIL Design, SIS Design, PSM Audit, Regulatory Compliance, Gap Assessment, Relief System Design, Relief Systems Revalidation, Relief Valve Mitigation, Relief Header, Flare Header Analysis, Allowable Backpressure, Spring Loaded Valves, CAPEX, Disposal System Design, Dynamic System Modelling

The Journey to Peak Facility Safety

Posted by Brandon Ring on Feb 24, 2019 10:34:05 PM

Establishing and maintaining an effective safety culture is a symphony of challenges and moving pieces.

Too often, those responsible engineers are stretched thin with competing priorities. Smith & Burgess is here to help. Our culmination of Process Safety knowledge enables us to quickly provide our clients with practical solutions that lead to compliancesignificant cost-savings, and of course, peak facility safety.

Read More

Topics: PSM Review, Industry Compliance, Compliance, OSHA, SIL Design, SIS Design, PSM Audit, Regulatory Compliance, Gap Assessment, Relief System Design, Relief Systems Revalidation, Relief Valve Mitigation, Relief Header, Flare Header Analysis, Allowable Backpressure, Spring Loaded Valves, CAPEX, Disposal System Design, Dynamic System Modelling

Refinement of Disposal System Design Loads

Posted by Edgard Kurnia on Jan 11, 2019 9:59:15 AM
 

With more brownfield capital projects coming back to life many operating companies are mobilizing to increase their facility's charge rates.

If you are one of these companies looking for improvements, correctly evaluating your flare system's maximum capacity could "make or break" your project's feasibility studies.

Read More

Topics: Overpressure Protection, Feasibility Studies, RAGAGEP, Flare Optimization, Quantitative Risk Assessment, QRA, Rate Increase, API 521, CAPEX, Disposal System Design, Dynamic System Modelling

 Safety Knowledge Should be Shared...

“It should not be necessary for each generation to rediscover the principles of process safety which the generation before discovered. We must learn from the experience of others rather than learn the hard way. We must pass on to the next generation a record of what we have learned.” - Jesse C. Ducommun, Safety Pioneer
 
As Process Safety engineers and consultants, we believe our unique position creates a responsibility for Smith & Burgess to share our years of accumulated safety knowledge.


>>> Keep up-to-date with our latest Process Safety knowledge, research, and content by subscribing below. >>>

Subscribe Here!

Recent Posts

Post By Topic

See all